Configuration:
Configure the QoS Router R1 with the steps below to enable packet marking.
Apply the following configuration to create a class-map which markes all EIGRP packets as critical
QoS-R1(config)#class-map match-all critical
QoS-R1(config-cmap)#match protocol eigrp
QoS-R1 has been preconfigured with a policy map named “Marked-as-EIGRP”. You need to apply the following configuration to create the precedence level for the class-map which you have just created.
QoS-R1(config)#policy-map Marked-as-EIGRP
QoS-R1(config-pmap)#class-criticl
QoS-R1(config-pmap-c)#set precedence 7
Now that you have completed the steps to configure a class-map that will mark all eigrp packets as critical you need to apply the policy-map to interface S0/0/0 of R1 the QoS-R1.
QoS-R1(config)#interface S0/0/0
QoS-R1(config-if)#service-policy output Marked-as-EIGRP
Download lab
ไม่มีความคิดเห็น:
แสดงความคิดเห็น